SLEEVE FILTER WITH DIRTY AIR INLET IN HOPPER VER. ATEX SLEEVES EXTRACTION FROM THE TOP
This filter represents the ideal solution for all filtration problems which require a sleeve dust collector for ATEX zones complete with an automatic cleaning system that allows the pressure drops, and consequently the machines suction, to be kept approximately constant. Dirty air enters in the hopper directly and passes through the filtering elements. Pulsair M is equipped with explosion-proof panels, necessary in the event of an explosion to release over-pressure. The sleeves are extracted from the upper panels.
Pulsair M is particularly suitable for all those extremely fine dusts, potentially explosive, which have a tendency to penetrate into the thickness of the fabric and are difficult to eliminate and clean. The sleeves are automatically cleaned by backwashing with compressed air. The cleaning system is equipped with a monitoring and control panel that reads the differential pressure and operates only if it is necessary to clean the sleeves. This system promotes a lower consumption of compressed air and a respective longer life of the sleeves. Choosing the right filtering sleeve and the rational filtration speed, the efficiency is close to 100% allowing to treat a wide range of pollutants.
Carbon steel sheets, punched and folded. Appropriately treated, RAL powder coated and baked in the furnace to ensure maximum corrosion resistance.
Exhaust system available
Filtering elements available
Download the documentation of the available colors and filter elements.