FILTRO A CARTUCCE PULSAIR CCO

INSULATED CARTRIDGE FILTER WITH DIRTY AIR INLET IN PRE-ABATEMENT ROOM

This filter represents the ideal solution for all filtration problems which require a cartridge dust collector complete with an automatic cleaning system that allows the pressure drops, and consequently the machines suction, to be kept approximately constant. The dirty air, before being filtered, passes through a settling chamber where the coarser dusts fall directly into the exhaust systems without reaching the filtering elements. This guarantees less clogging of the cartridges and guarantees greater durability.   Filter insulation, made of high density mineral wool, ensures insulation at temperatures up to 250°C. The filter can be equipped with a fire extinguishing system.

Pulsair C is particularly suitable for all those extremely fine dusts which have a tendency to penetrate into the thickness of the fabric and are difficult to eliminate and clean. The cartridges are automatically cleaned by backwashing with compressed air. The cleaning system is equipped with a monitoring and control panel that reads the differential pressure and operates only if it is necessary to clean the cartridges. This system promotes a lower consumption of compressed air and a respective longer life of the cartridges. Choosing the right filtering cartridge and the rational filtration speed, the efficiency is close to 100% allowing to treat a wide range of pollutants.

Construction

Carbon steel sheets, punched and folded. Appropriately treated, RAL powder coated and baked in the furnace to ensure maximum corrosion resistance.

Exhaust system available

  • Bin

Available Versions

  • Carbon steel RAL powder coated
  • 304 stainless steel
  • 316L stainless steel

Filtering elements available

  • Filtering cartridges 

Download the documentation of the available colors and filter elements

fitro a maniche pulsair mco

Standard equipment

  • pre-abatement chamber
  • support legs and hopper
  • bin collection system
  • door for inspection and maintenance
  • automatic pneumatic cartridge cleaning system
  • insulation with rock wool
  • painting and components for high T
  • prearrangement of fire-fighting system with pipes, nozzles and temperature probe

Optionals available

  • tank cover
  • control unit cover
  • pressure regulator
  • cartridge extraction from the top
  • ladder and railings for access to extraction
  • heating cable for holding the temperature inside the filter
  • electrical cabinet

Applications

  • Biomass combustion

Sectors

  • Power
  • Foundry

© Copyright 2018 | PHAMM Engineering Srl
P.Iva 09120100962 Cap.soc. 10.000 € I.V.

Via Cascina Cavallasco, 1/i 20060, Pozzo d’Adda (MI)
Tel.: +39 02 8364 7535 Fax: +39 02 4946 5507